Adjustable Turntable
Two rotating turntables plus multiple articulating and telescoping booms allow the 40"x 60" rotating platform to deploy off of either side of the truck to access all of your structures. Turntable no. 2 comes equipped with an automatic leveling system, providing smooth platform movement. In addition, the operator can make manual adjustments of +/- 5 degrees to compensate for the slope of the bridge. With the elimination of the leveling arms, the Aspen A-62 has more vertical clearance to get over high fences.

Telescoping & Rotating Platform
The Aspen A-62 has the capability of providing inspectors with over 13' (4m) of vertical reach through the use of its telescopic 4th boom section. This fully hydraulic feature will enable you to get up and behind your deepest girders for a close-up inspection. The added flexibility of a 180 degree rotating platform makes maneuvering into working positions easy, increasing productivity and efficiency.

Specifications and Standard Equipment
• Plus 1 Graphic Terminal Interface
• Hydraulically adjustable turntable
• Automatic leveling platform: 40" x 60" (1016mm x 1524mm), 600lb. (272kg.) capacity w/access gate
• 2 sets of controls: one set in the platform and one set at the pedestal
• 4 articulating booms (3rd & 4th booms telescope); 2 rotating turrets, rotating platform
• Stability interlocks with monitoring system
• Two power systems: power take-off from the truck's transmission and a back-up diesel power unit
• 12-volt intercom system between platform, driver's compartment and pedestal

Options
• Air Compressor and air line in platform
• Generator with electrical outlet in platform
• Platform Heaters & Floodlights
• Remote Controls