Stabilizing Systems
The Aspen A-75 is fitted with stabilizing systems which allow operators the advantage of being able to move the truck while the platform is deployed. OUTRIGGERS ARE NOT REQUIRED. A full-length subframe provides strength and stability. Axle locks unitize the chassis and truck axles. A counterweight at the base of the pedestal rotates with the unit, staying within the width of the chassis. An interlock system tied to the controls maintains operation within the unit's full range of stability. An indicator panel at the pedestal enables operators to constantly monitor boom and turret movements.
Smooth, Precise Control
7 individual controls are provided which operate all boom and rotation
functions. Controls are proportional type which afford metered movement
in tight areas. Three (3) complete sets of controls are provided, one
at the truck, one in the platform and a remote set attached to an extendible
cord.
16'
(4.9m) telescoping 4th boom
With the help of an innovative articulating/telescoping fourth boom, the
Aspen A-75 places your technicians behind deep girders.
Reach, Range and Maneuverability
Four boom pivot points and two points of rotation give the Aspen A-75
an incomparable ability to operate in, around, through and over all types
of obstructions. Even in close quarters, the Aspen A-75 can be deployed,
reaching across sidewalks and over fences to gain access to underbridge
areas. With the three-person platform installed, operators can reach up
and behind deep girders for thorough inspections. Because the vehicle
can be moved while the platform is under the bridge, the Aspen A-75 provides
even greater range and operating efficiency.
Specifications and Standard Equipment
• Automatic leveling platform: 40" x 60"(1016mm x 1524mm),
600lb. (272kg.) capacity w/gate
• 3 sets of controls: one set in the platform, one remote set, one
set at the pedestal
• 4 articulating booms (3rd boom telescopes); 2 rotating turrets
• Stability interlocks with monitoring system
• Two power systems: power take-off from engine and back-up power
system
• 12-volt intercom system between platform, driver's compartment
and pedestal
• Slope indicator alarm
Options
• Platform heater, lights, 110-volt outlets, air lines hydraulic
tool lines, tool trays
• Tool compartments
