Factory Rebuild Program

1.Unit Disassembly and Cleaning
Electrical and hydraulic components are removed. The unit is then disassembled removing all structural components. All structural components are abrasively cleaned exposing bare metal to facilitate the inspection process.

2.Inspection
A close visual inspection is done to the entire unit. All critical welds are non-destructively tested. Cylinders are inspected and pressure tested. Hydraulic valves are inspected and tested. Auxiliary systems are inspected and thoroughly tested.

3.Replacement and Reassembly
All steel components are repainted inside and out prior to assembly. During the assembly process, pins and bushings are replaced, new hoses and fittings are installed throughout and all wiring and limit switches are replaced. New turnable bolts are installed and checked for proper torque. Any requested upgrades are fitted and installed. The entire unit is reassembled and readied for testing.

4.Final Finishing and Testing
After final painting is complete, a full set of operation and safety decals is installed and the unit is readied for cycle and stability testing. All ANSI stability tests are performed from a bridge and documented along with a myriad of our own stringent tests and cycling. The refurbished unit is shipped only after successfully completing each and every test and inspection step in the process.

"Rely on Aspen Aerials for leading edge technology, superlative craftsmanship, lasting reliability and unparalled support. Our years of experience and reputation for quality will ensure the continued safe operation of your equipment for years to come."