Stabilizing
SystemsThe Aspen UB50 is fitted with stabilizing systems which allow operators the advantage of being able to move the truck while the platform is deployed. OUTRIGGERS ARE NOT REQUIRED. A full-length subframe provides strength and stability. Axle locks unitize the chassis and truck axles. A counterweight at the base of the pedestal rotates with the unit, staying within the width of the chassis. An interlock system tied to the controls maintains operation within the unit's full range of stability. An indicator panel at the pedestal enables operators to constantly monitor boom and turret movements.
Smooth,
Precise Control7 individual control controls are provided which operate all boom and rotation functions. Controls are proportional type which afford metered movement in tight areas. Three (3) complete sets of controls are provided, one at the truck, one in the platform and a remote set attached to an extendible cord.
Overhead
CapabilitiesWith an automatic platform leveling system standard, movements to a vertical overhead position can be performed. The Aspen UB50 can reach 38' (11.6m) vertically above the Bridge Deck.
Reach,
Range and ManeuverabilityFour boom pivot points and two points of rotation give the Aspen UB50 an incomparable ability to operate in, around, through and over all types of obstructions. Even in close quarters, the Aspen UB50 can be deployed, reaching across sidewalks and over fences to gain access to underbridge areas. With the three-person platform installed, operators can reach up and behind deep girders for thorough inspections. Because the vehicle can be moved while the platform is under the bridge, the Aspen UB50 provides even greater range and operating efficiency.
Specifications and Standard Equipment
• Automatic leveling platform: 40" x 60"(1016mm x 1524mm), 600lb. (272kg.) capacity w/gate
• 3 sets of controls: one set in the platform, one remote set, one set at the pedestal
• 4 articulating booms (3rd boom telescopes); 2 rotating turrets
• Stability interlocks with monitoring system
• Two power systems: power take-off from engine and back-up power system
• 12-volt intercom system between platform, driver's compartment and pedestal
• Slope indicator alarm
Options
•
Extending 4th boom:
The
platform is installed on a 7'(2.1m) long 4th boom. An option extension
can be included to increase the vertical reach to
14'(4.2m)
•
Platform heater, lights, 110-volt outlets, air lines hydraulic tool lines,
tool trays
•
Tool compartments
<< Printable Version >>
Aspen Aerials
4303 West 1st Street
Duluth, MN 55807 USA
Phone (218) 624-1111
US Toll Free (800) 888-2773
Fax (218) 624-1714